Skip to content
Sumly

Gravel & Mulch Calculator

Volume, weight and bags of gravel, soil, sand or mulch for an area.

In

Typical depths: 5 cm for gravel paths and driveway top-ups, 7.5 cm for mulch to keep weeds down, 10–15 cm of topsoil for new lawns and beds.

Out

25 kg bags

64

Gravel, 1.00 m³

Volume1.00 m³
Approximate weight1.60 tonnes
Area covered20.0 m²
Weight uses 1.6 tonnes per m³ for gravel. Wet material is heavier, so check what a delivery truck or trailer can carry.

How the Gravel and Mulch calculation works

The volume is the area times the depth. Weight is that volume times the material's typical loose density: about 1.6 tonnes per m³ for gravel, 1.3 for topsoil and 0.35 for bark mulch.

Bags sold by weight are counted from the weight; bags sold by volume, and bulk loads, from the volume.

Densities are averages for dry, loose material. Wet loads are heavier, so allow for it when checking a trailer's limit.

Worked example

A 5 × 4 m gravel area 5 cm deep needs 1 m³ of gravel, which weighs about 1.6 tonnes: 64 bags of 25 kg, or one or two bulk bags.

The tool above opens with these numbers. Change them to run your own scenario, or press Reset to come back to this example.

Frequently asked questions

How much paint a room needs, and which tins to buy.

Cubic metres or yards of concrete, and bags of premix, for a slab or posts.

Rolls of wallpaper for a room, pattern repeat included.

Tiles and boxes for a floor or wall, with grout and waste allowed for.

Packs of laminate, vinyl or wood flooring for a room.

Roof area from its footprint and pitch, in squares and shingle bundles.

  • gravel calculator
  • mulch calculator
  • topsoil calculator
  • landscaping
  • diy